Car paint sealant can be a great product for car owners. Especially for those buyers who are looking forward to keep their vehicles cleaner and greatly detailed. However, the shine and protection the car paint sealant provide to the car heavily depend on the way you apply it. Though you can choose the professionals to apply the good car paint sealant to the car, if you are looking for the DIY, we will suggest keeping a few important things in mind before starting.
Table of Contents
- Step-by-step guide for applying car paint sealant
- Step 1: Wash the car usually
- Step 2: Make sure that the car is completely dry before the sealant application.
- Step 3: Applying the sealant
- Step 4: After applying the sealant, leave it on the surface for at least 15 minutes (or as recommended on the pack)
- Step 5: Buff off the excess sealant and your car is ready to drive
Step-by-step guide for applying car paint sealant
Here, we are going to talk about the right way to apply the car paint sealant on the vehicle. So, if you were looking to apply the car paint sealant for the first time, you should once have a look at the following guide to make things easier for you.
Step 1: Wash the car usually
The first step for applying a car sealant or any other polishing agent is to wash the car as usual. We would recommend you to use the high-quality carnauba wax wash to get a dedicated car wash liquid to get rid of the dirt and other contaminants from the car surface. IF your vehicle is dirtier than usual, we will suggest you to use clay and other methods to make the car cleaner than before.
Step 2: Make sure that the car is completely dry before the sealant application.
After washing the car, the next step is to dry the car. For this, we will suggest you to use a soft cotton or microfiber towel that can lift the water without putting too much pressure. If possible, leave the car for a while so that it dries up completely. Avoid drying the vehicle in direct sunlight.
Step 3: Applying the sealant
The next step is to apply the sealant on the vehicle’s surface. There are two major ways to do this. One is to use the supplied foam applicator, and the other one is to use the car polisher. Let’s have a look at both these ways.
- If you are using the hand applicator
Most car paint sealants come with an applicator that is a piece of foam. All you need to put a few drops of the sealant to the foam directly and rub it on the car’s surface in a circular motion. The circular motion will help you tackle the swirls easily. Make sure to work on a single part of the vehicle before moving to the next panel.
- If you are using the polishing machine
In case you are using the professional car polisher, choose the right application pad, and apply the sealant on the pad directly. Set the polisher to the lowest speed and slowly move the polisher on the car’s surface.
Step 4: After applying the sealant, leave it on the surface for at least 15 minutes (or as recommended on the pack)
Once you have covered all the surface with the sealant, the next step is to wait for a while. The car paint sealant needs time to settle down. Usually, it is recommended to wait for at least 15-20 minutes after applying the sealant on the paint’s surface.
Step 5: Buff off the excess sealant and your car is ready to drive
The next step is to buff off all the excess sealant and get flawless results. You can use the polisher or microfiber buff towel to do this. Once done, you can get the best care and long-lasting shine.
Check the demo here:
So, this was the simplest and the most effective way to apply the car paint sealant. Try your hands on it and get the best results and long-lasting shine to your vehicle. For better results, we will recommend you to try hands on the top brands and reliable products that have the trust of the car owners. You may have to spend a bit more money to buy the branded car paint sealants, but the performance will be great and worth considering.