It is crucial to know that how to change and repair a tire for every car owner. Alongside, owning the tire inflator, a jump starter and other emergency tools are crucial. If you have a jump starter in your car, then you never have to worry about a dead battery problem.
Jump starters s are a type of device which is used to kick start your car’s engine by alternating the current from the mini but powerful battery. These starters are helpful to start the engine if your battery dies in the middle of the road. You can buy a professional jump starter kit easily in the market. But it is necessary to know that how to use it.
Here below are the easiest steps that will help you learn about the simple method of getting started with the use of a jump starter. To make you understand that how to use a jump starter to jump a car.
Table of Contents
Charge your portable jump starter
Jump starters s are used for charging the batteries of the car but the starter only works when it is charged. If your starter is not charged, how can you think about charging your battery via it? So, it is important to charge the starter periodically. This is the golden rule that charges your jump starter after every use and at least once in 3 months. Jump starters s also lose their charging in the cold or hot weather. So it is also recommended to charge a jump starter while going on a long trip.
Usually, in the jump starter, the indicator light starts to glow which tells you that charging is required. It is so easy to charge a jump starter. To charge it simply insert the power adapter of the starter into the plug. Also, read the important instructions about the charging of the jump starter in the user’s manual.
Preparing the jump cable
Now is time to connect the jump starter with the car’s battery via the jump cables. These cables come with the jump starter kit. There are two jump cables in the starter kit, black and red. Both the cables have clamps on their terminals. Clamps are also of red and black colour. Wear protective clothes and gloves before connecting the starter to your car’s battery. And take off all the jewellery.
Identify the positive and negative terminals of the car’s battery. You can easily do it by colour differences. The positive terminal is red and the negative one is black. The symbols are also there on each terminal for ease. Before attaching the cable clean the excessive corrosion from the terminals of the car’s battery.
Connecting the clamps with the battery
Identify first the negative and positive clamps of the portable jump starter. It is easy, the positive clamp is red and the negative is black. Turn off the jump starter before connecting the cables to the car’s battery. And so not allow positive and negative clamps to come into contact for your safety.
With the use of gloves connect the jumper cable into the appropriate terminals of the battery. Firmly place the jumper cables along with the batter. To ensure that the clamps are connected properly, you can look from different angles. For old cars with old batteries, it is always important to clean the positive and negative terminals so that you have an adequate connection with the clamps.
Turning on the jump starter to begin
After this, all work of connecting the jumper cables to the battery is the time to turn on the portable jump starter. Make sure that both the jump cables are not damaged, wise it can give you a shock. Turn on the on/off switch of the jump starter manually. And wait for few minutes. This time is taken for charging the car’s battery. After few minutes, try to start your car engine.
Your engine will start in approx. 1 to 3 attempts. If the engine does not start even after 5 attempts, you need to replace your car’s battery with the new battery. It means that your battery is dead not discharged.
Turning off the jump starter
If your engine starts adequately, turn off the portable jump starter manually as before. After turning it off, take off both the positive and negative clamps from the car’s battery with the help of safety gear like gloves. Make sure that you don’t remove the clamps during the starer is on as it might be dangerous.
Some jump starters offer the easy feature to kill power by removing the terminals from the battery and they automatically turn off. If you have an old fashioned jump starter, it would be excellent to turn off the power before removing it otherwise chances of getting shocked by touching the live wire are higher.
Recharging the starter After Reaching the destination
After its use in remote areas and reach your destination, don’t forget to charge the portable jump starter for reuse on the next trip. To recharge it, plug it into the AC adapter and turn on the switch. It will take approximately 3 to 5 hours in charging. Some other jump starters take 12 to 15 hours. It is also optimal to check up on the portable jump starter after every six months. By following these steps, you can jump-start your car with the help of a portable jump starter.
The Final Verdict
Using a jump starter is easy and requires you the basic knowledge of using the method. For a layman, it would be optimal to go through the instruction manual of Jump starters . Meanwhile, following the above-given tips will help you learn the same thing, but efficiently. Keep in mind that you should always check the battery level of your portable Jump starters . We hope that this guidepost will help you easily jumpstart the car and getting rid of any issue that you face due to the low battery of the car.