How to Use Jumper Cables to Jump Start a Car?

A car consists of several parts that remain unnoticed during the maintenance period. Such issues are common and having the same habits for long period might make you face unwanted issues. The problem happens when you haven’t used the car for quite a time and the battery dies or discharges. In such a situation, using a jump starter can come in handy.

While starting the car, you can find that your car doesn’t start due to a lack of battery juice. This issue can occur when the car is on ideal, and you forget any electronic appliance on power. Commonly people end up not switching off the lights of the car, and it eats up the battery of your car. Other reasons might be an old battery that doesn’t have enough power to run anymore.

So, jump-starting the car might seem like a great option. But, how to know if the battery is behind no ignition. Here are some tips.

Tips to Know if Your Car Battery is The Culprit

car battery

The underlying issue related to the battery can be checked by doing a few tests. The common signs of battery-related issues are –

  • No indicator light in the speedometer. Usually, you get sign related to neutral, gear, seat belt, and more. If there are no lights then it is a sure sign that your car battery is dead.
  • If your car’s speedometer is turning on but when you try to ignite, the ignition doesn’t work. You get a knocking sound, and every light in the speedometer turns off. In this case, the battery power is low, and it can’t start your car.
  • You open the car’s bonnet and look for battery terminals whether they are properly connected or not. If they are corrected properly and you are getting no light in the speedometer then the battery might be dead.

These are a few signs that your car’s battery is the reason behind this issue. If you try to turn on the car and you get starting sound, but the car doesn’t start, and the lights in the speedometer still turned on, then there might be any other problem.

Jump-Starting your car

Jumper Cables For Car Battery

To jump-start your car, you need two things –

  1. Jump Start Cables
  2. Portable jump start battery or another vehicle

Once you have these two things then you can follow the below-given steps properly to jump start your car –

  • It would be better to learn a little about the battery and its terminal. There are two terminals, and one is positive and one is negative.
  • The positive terminal is slightly bigger among these two and it will have a sign (+). Few manufacturers mention positive terminal by POS sign.
  • The negative terminal is usually marked with a (-) sign and you can find NEG marked on the battery.
  • Now, you must connect the jump starter cable. Connected the red cable to the positive terminal.
  • On the negative terminal, you can connect the black jump starter cable. Make sure that you connect the alligator clips properly.
  • The other battery you are using for the jump must have the matching voltage system for your car. You can check the existing battery or your car’s manual to learn about the right voltage.
  • Put both cars in the parking space next to each other, then open the bonnet of both cars.
  • Start by connecting the positive terminal of the donor battery to a dead battery. Connect the negative terminal of the donor battery and then connect another side of the cable to any metal strut on a dead battery vehicle.

Now, ignite the first donor car and keep it on for few minutes. Ignite the dead battery car and let it stay turned on for few minutes. Remove the terminals, and you are good to go.

What can drain your car’s battery?

Car Batteries

Many times, people don’t pay attention to the speedometer’s indicator lights. Well, this habit might make them face issues in a long run. If you want to know that what are the issues behind such kind of battery drain then let’s have a look –

  • Something causing a parasitic draw

When your car is turned off, it is still providing power to low-power equipment like the clock, alarm, radio and few other systems. As these devices don’t consume much power, the impact is minimalistic. But, the issue can occur when the car is turned off and door lights, interior lights and such other lights are turned on due to any issue.

  • Leaving the Headlights on

Most new cars come with features like auto-turn off feature, which terminate the power supply to all electronic like headlights when you press the lock button. However, the old cars and the low-segment vehicle doesn’t come with the feature. So, when you drive in the night and park the car in the day time, you end up forgetting the headlights, which can drain the battery quickly.

  • The battery isn’t charging while driving

Batteries charge when you are driving but if you are battery’s charging system is not working properly then it might charge slow or it may doesn’t charge.

  • The battery connector is not connected adequately

The most common issue among old cars is with their battery connector. The connector of the battery gets loose due to vibration heat and other reasons which can cause a spark at the terminals. This small spark produces heat and kills the battery power.

  • Extremely hot or cold weather

Poor weather is one of the major reason that most people get battery-related issues. If the outside temperature is too low, your car’s battery will start heating, and it will discharge fast. The same thing happens in the cold weather, and it heats to prevent freezing, but it ends up wasting the juice.

  • Too Many Short Rides

While turning on the car, you are using plenty of power from the battery. During short rides, you are not filling up enough amount that you have used. People driving on short distances usually kill their car’s battery power. The easy solution to such a problem is keeping the car turned on and putting it on ideal for few minutes so the car’s battery charge up.

Conclusion

Using the jump starter cable is easy and if you want to prevent your car’s battery from damaging then you must follow the above-mentioned tips. There are several pre-caution that you must follow while using the jump-started cable otherwise you might face issues like getting sparks, reverse connection or shock.

Reply